- Fast & global delivery
- Packaging Manufacturer Since 2005
Freezer-grade bag manufacturer · since 2005
Custom Frozen Food Packaging Bags That Stay Sealed at −40 °C
Printed stand-up pouches, vacuum bags and roll film for frozen vegetables, seafood, meat and ready meals — made from film to finished bag in our own ISO 22000 cleanroom plant in Shenzhen, China. Freezer-grade PE, nylon and high-barrier laminates that stay flexible at −18 °C and hold their seal through blast freezing.
Our own plant since 2005ISO 9001 · ISO 22000 · GRSFDA 21 CFR tested filmMOQ from 1,000 pcsFree design & samples
−18 °C to −40 °C
Structures specified for retail frozen storage and blast freezing
80–160 µm
Total film thickness range we build frozen bags in
11-point
Finished-bag QC release checklist before anything ships
6,520 m²
Our own Shenzhen plant, 30+ machines, in production since 2005
What Are Frozen Food Packaging Bags?
Frozen food packaging bags are multi-layer flexible bags engineered to stay strong, sealed and printable at freezer temperatures — typically −18 °C in retail and cold-store storage, and as low as −40 °C during blast freezing. Unlike ambient snack packaging, a frozen bag has to resist cold embrittlement, moisture migration and freezer burn while surviving rough handling through the whole cold chain.
That is a materials problem, not a printing problem. The film structure, total thickness and seal width all have to be specified around your product, its weight and how it is filled — which is exactly the conversation we have with you before quoting.
The four ways frozen packaging fails
- Cold embrittlementFilm that cracks or splits when handled at −18 °C
- Seal failureWeak seals that burst under ice weight and drop impact
- Freezer burnMoisture loss and ice crystals caused by a poor water-vapor barrier
- PinholesPunctures from bones, shells and sharp frozen edges
We design against all four, then verify it in our own lab: seal-integrity (air-tightness) testing and material tensile testing on every structure we recommend.
Freezer-Grade Film Structures We Build
These are the laminations we run in-house on our own dry-lamination machines. Tell us the product, the pack weight and how you fill it, and we will point you at the right one — and tell you when a cheaper structure is genuinely good enough.
| Film structure | Best for | Why it survives the freezer | Typical total thickness |
|---|---|---|---|
| PE (LDPE) mono-film | Bulk frozen vegetables, fries, ice, IQF lines | LDPE is the most cold-tolerant layer we use — it stays flexible and impact-resistant at −18 °C instead of going brittle. | 80–120 µm |
| NY / PE | Vacuum-packed frozen meat, poultry and marinated portions | Nylon adds puncture and pinhole resistance over bones and sharp edges; PE gives a strong, reliable low-temperature seal. | 90–140 µm |
| PET / NY / PE | Frozen liquids, sauces, soups and heavy retail packs | Our most durable frozen structure: printable PET outside, nylon for toughness, PE for seal strength under weight and drop impact. | 100–160 µm |
| PET / PE | Printed retail frozen bags — dumplings, bakery, dough | Glossy PET carries high-definition gravure print while PE handles the cold seal. The workhorse for shelf-facing frozen packs. | 80–120 µm |
| PET / VMPET / PE | Frozen ready meals and anything light- or oxygen-sensitive | The metallized middle layer cuts oxygen and light transmission, slowing fat oxidation and freezer burn over a long frozen shelf life. | 90–130 µm |
| BOPE / PE (recycle-ready) | Brands with recyclability targets and retailer mandates | A mono-material PE structure that keeps freezer flexibility while staying compatible with PE recycling streams. | 90–140 µm |
Film thickness is quoted in microns (10 mic = 0.01 mm). Heavier packs, sharp contents and automatic filling lines all push the specification up — we will confirm the exact structure on your quote.
Frozen Bag Formats We Make
Every format below is made on our own bag-making machines — 11 of them — so format changes, zipper positions and die-lines are ours to control, not a subcontractor’s.
Stand-Up Pouch with Zipper
Shelf-facing frozen retail packs. Resealable zipper, tear notch, optional hanging hole and clear window for frozen fruit, dumplings and snacks.
Three-Side-Seal & Pillow Bags
The most cost-efficient format for high-volume frozen vegetables, fries and IQF fruit. Also supplied as roll film for automatic filling lines.
NY/PE Vacuum Bags
Nylon-laminated vacuum bags for frozen meat, poultry and seafood — pinhole resistance over bones and shells, with a seal that holds under ice weight.
All Custom Frozen Food Bags
Every frozen food bag in our range, plus the zipper, steam and retort pouch styles frozen and ready-meal brands order most. Each opens its own specification page — material structure, sizes, closures and finishes — and every bag is custom printed to your artwork.
Frosted Matte Stand-Up Pouches
View specifications →Ready Meal Retort Pouches for Curries & Soups
View specifications →High-Barrier Aluminium Foil Retort Pouches
View specifications →Stand-Up Retort Pouches for On-the-Go Meals
View specifications →OEM Retort Pouches, Custom Printed to Size
View specifications →Retort Bags in Bulk for Food Manufacturers
View specifications →Custom Freeze-Dried Pet Treat Stand-Up Pouches
View specifications →Recyclable Frozen Fruit Bags
View specifications →Freezer-Safe Stand-Up Pouches with Zipper
View specifications →What We Recommend, By Frozen Product
A starting point from 20 years of frozen and chilled work. Your fill weight, freezing method and filling line can change the answer — send us the details and we will confirm it in writing.
| Frozen dumplings & dim sum | Printed PET/PE or PET/NY/PE stand-up pouch with a zipper, tear notch and hanging hole for retail freezers. |
|---|---|
| Frozen meat & poultry portions | NY/PE vacuum bag at 100–140 µm for pinhole resistance over bone; PET/NY/PE for heavier cuts. |
| Frozen seafood & shellfish | PET/NY/PE with a reinforced bottom seal to handle sharp shells, ice glaze and drip loss. |
| Frozen fruit & smoothie packs | Recycle-ready BOPE/PE or PE mono-film with a resealable zipper; matte finish and clear window options. |
| Frozen vegetables & fries (bulk) | PE mono-film pillow or side-gusset bags, supplied flat or as roll film for automatic filling lines. |
| Frozen ready meals | PET/VMPET/PE flat-bottom pouch for light and oxygen protection, with a wide panel for nutrition and cooking instructions. |
| Ice cream & frozen desserts | Matte PET/PE or MOPP/PET/PE with low-temperature seal strength and a premium matte hand feel. |
| Frozen bakery, dough & pastry | PET/PE with a clear window so shoppers can see the product, plus a zipper for partial use. |
COLD-CHAIN QUALITY CONTROL
We Test Frozen Bags Before You Do
Frozen packaging fails in the field, weeks after it leaves the plant — which is why we check it before it ships. Our in-house laboratory runs seal-integrity (air-tightness) testing and material tensile testing, and every finished order is released against an 11-point inspection standard covering dimensions, print color, lamination, seal edges, zipper function, air-tightness and odor.
Seal, air-tightness and zipper defects are zero-tolerance: those batches do not get released, they get remade.
- Seal & air-tightness
- Tested in our own lab on every structure we recommend
- Tensile strength
- Measured on the laminated film, not just the raw roll
- 11-point release
- Every finished order checked before it is packed
- Lamination
- Done in-house — delamination, wrinkles or bubbles never ship
PRINTING & LAMINATION
Printed on Our Own Presses, Bonded on Our Own Laminator
A frozen bag is only as good as its laminate. We print and bond the film in-house, so the ink sits sealed between layers — away from ice, condensation and your food — and one team answers for print, structure and seal.
Volume runs, exact brand color
Gravure printing
- MOQ
- From 10,000 pcs per design
- Color
- CMYK plus Pantone spot colors, matched on press to your standard
- Set-up
- Engraved copper cylinders, kept for your reorders
- Cost
- Lowest price per bag once volume is there
Best forCore SKUs — vegetables, dumplings, seafood
Launches and many designs
Digital printing
- MOQ
- From 1,000 pcs per design
- Set-up
- No plates, so no cylinder cost
- Designs
- Several flavors or SKUs in one order
- Color
- CMYK, matched to your approved proof
Best forNew lines, seasonal packs, private-label tests
Where a frozen bag gets its strength
High-speed lamination
- Bonds
- Printed PET or BOPE to nylon, foil and PE sealant layers
- Ink
- Reverse-printed and sealed between layers — nothing to scuff in the freezer
- Builds
- PET/PE, NY/PE, PET/NY/PE, PET/VMPET/PE, BOPE/PE
- Checked
- For delamination, wrinkles and bubbles before bag making
Best forEvery laminated frozen bag we make
Audit-Ready Food-Safety Documents, Shared on Request
Frozen food buyers are audited, so their packaging supplier has to be auditable too. Here are our three certificates and one FDA food-contact test report — click any scan to read it full size. Copies go out with your quote and with your order documents.
| Document | What it covers | Why frozen food buyers ask for it |
|---|---|---|
| FDA 21 CFR 177.1520 Test report | An independent lab tested our PE food-contact film against the US FDA rule for polyolefins in direct food contact, and it passed (report HLF24003138EA, March 2024). | The PE sealant is the layer touching your frozen product — US importers and retail compliance teams usually ask for this first. |
| ISO 22000 Certificate | Food-safety hazard controls from incoming film through printing, lamination and bag making in our cleanroom plant. | Frozen food often goes from bag to pan with no wash step, so your auditor wants the bag plant inside a food-safety system. |
| ISO 9001 Certificate | Documented processes: laminate specs, seal settings, color standards and batch records for every order. | Your tenth reorder of a 2 kg vegetable bag has to run and seal on your line exactly like the first. |
| GRS Certificate | Global Recycled Standard certification with a verified chain of custody for recycled-content materials. | Supports recycled-content claims on eligible structures — ask us which frozen builds qualify. |
Sustainable Frozen Food Packaging, Without the Greenwash
Deep-freeze temperatures are the hardest place to put an eco film. Here is what actually holds up.
Recycle-ready mono-material
BOPE/PE structures keep the flexibility a freezer demands while staying inside PE recycling streams — the realistic route for brands with retailer recyclability targets.
Certified recycled content
We are GRS certified, so recycled content in your frozen packaging can be documented and verified rather than claimed.
Compostable options, honestly scoped
PLA-based compostable films are available, but they lose flexibility and barrier performance at deep-freeze temperatures. We will tell you where they genuinely work — short-cycle chilled, frozen fruit — and where they do not, instead of selling you a claim your product cannot support.
The Factory Behind Your Frozen Packaging
We have been manufacturing flexible packaging since 2005. Everything below is ours — the building, the machines and the people who run them.
Our own 6,520 m² plant
6,520 m² of production space in Longgang, Shenzhen, with 30+ machines including 4 printing presses, 2 laminators and 11 bag-making machines.
One team, film to pallet
Our own production and sales staff run your order end to end, so the person quoting you can actually walk to the machine.
We meet our buyers in person
You will find us at international packaging exhibitions every year — many of our frozen-food clients started as a stand visit.
From Inquiry to Pallet
A frozen packaging project usually runs 7–15 days from artwork approval, depending on structure and quantity. Here is the whole sequence.
01
Brief & structure advice
Send us the product, pack weight, freezing method and target price. You get a recommended film structure and thickness, usually within one business day.
02
Free design & die-line
Finished artwork, a rough idea or nothing but a reference photo — our in-house designers build the print-ready file and die-line at no cost.
03
Free sample & proof
We send free samples (you cover freight only) and, for new structures, a pre-production proof so you approve the real bag before mass production.
04
Print, laminate, make
Gravure or digital printing with Pantone matching, dry lamination and bag-making on our own lines, in a cleanroom environment.
05
QC, then pallets & papers
11-point release inspection, then packing, shipping documents and the compliance certificates your buyer or auditor will ask for.
Frozen Packaging Guides From Our Team
Written by the people who run the machines — specifications, sizing and sourcing, with no sales pitch.
Frozen Food Bag Sourcing GuideFilms, specifications and barrier properties, compared side by side.The Complete Buyer’s Guide for Custom Bulk OrdersHow to brief, cost and order custom frozen packaging in volume.Frozen Food Packaging Bag Size GuideBag dimensions by fill weight, with gusset and headspace allowances.Frozen Seafood Pouch Size GuideExact dimensions, materials and specs for every pack weight.
Frozen Food Packaging Bags — FAQ
What is the best material for frozen food packaging bags?
It depends on the product. For bulk frozen vegetables and fries, a PE (LDPE) mono-film is usually enough — LDPE stays flexible at −18 °C. For vacuum-packed meat and seafood, NY/PE adds the puncture resistance needed over bones and shells. For heavy or liquid frozen packs, PET/NY/PE is our most durable structure, and PET/VMPET/PE adds light and oxygen protection for long frozen shelf life. Tell us the product and we will specify it for you.
What thickness should a frozen food bag be?
Most frozen bags fall between 80 and 160 µm in total thickness. Light retail packs up to 500 g work at 80–100 µm; 1–2 kg retail packs typically need 100–130 µm; bulk and food-service packs, sharp contents or liquids go to 130–160 µm. Automatic filling lines and drop height also affect the final specification, which we confirm on your quote.
Are your frozen food bags recyclable?
Mono-material PE and BOPE/PE structures are recycle-ready and compatible with PE recycling streams. Multi-layer structures such as PET/NY/PE or metallized laminations deliver higher barrier and toughness but are much harder to recycle. We are GRS certified, so recycled content can also be documented. We will show you the trade-off honestly rather than labelling everything “eco”.
Can frozen food bags be microwaved or boiled?
Not by default. Standard frozen packaging is built for cold performance, not heat. If you need a bag the consumer can boil or microwave, we make retort and boil-in-bag structures using RCPP inner layers rated for high-temperature processing — tell us up front and we will quote that structure instead, because the two are not interchangeable.
What is your minimum order quantity for frozen food packaging?
From 1,000 pcs with digital printing, or 10,000 pcs with gravure printing. Specialty structures such as pure-aluminum or compostable films can carry a higher minimum — we will confirm it with your quote rather than surprise you later.
Do you work with small businesses and start-ups?
Yes — a large share of our frozen-food customers started with one SKU. Digital printing keeps the first run small and plate-free, our design team builds your artwork for free, and you can scale into gravure printing once volumes justify it. You deal with the same factory either way.
Can you print our own design, and what is the lead time?
Yes. We print CMYK plus Pantone spot colors, matched to your color standard, using gravure printing, or digital printing for short runs and multiple SKUs. Send finished artwork, a sketch or just a reference photo — our in-house team prepares the print-ready file and die-line free of charge. Production normally runs 7–15 days after artwork approval.
Do you supply roll film for automatic frozen packing lines?
Yes. We supply printed roll stock film on our own slitting machines, wound and cored to your machine’s specification for vertical and horizontal form-fill-seal lines. Send us your machine model, film width, core size and roll diameter limits and we will match them.
Get a Quote on Your Frozen Food Packaging
Tell us the frozen product, pack weight and quantity — you will get a film-structure recommendation, a price and a free sample plan. Straight from the factory that makes them, since 2005.
- Reply
- Within one business day
- Design
- Free artwork and die-line support
- Samples
- Free — you cover the freight only
- MOQ
- 1,000 pcs digital / 10,000 gravure · 7–15 days after artwork approval
- Papers
- ISO 9001, ISO 22000 and GRS certificates plus the FDA 21 CFR test report