CategoriesIndustry News News

PEWhat is the effect of medium additives on composite strength?

PEWhat is the effect of medium additives on composite strength? The specific effects are as follows: 1,PEShortly after the film is left, the slip agent will migrate toPEOn the surface of the film, a thin dense layer is formed, which blocks the adhesive and thePEbonding of the membrane surface, resulting in the inability of the adhesive toPEMolecular contact, resulting in a significant decrease in the composite initial viscosity. The composite strength remains low even with increasing curing time. 2, The initial viscosity of the composite is acceptable, but as the curing time increases, the composite strength becomes lower and lower, and a layer of white powdery substance appears between the two layers. This is due to productionPEhigh slipperinessPEThe raw material, due to the high content of the slip agent in the film, is subjected to high temperature (40~50During the curing process, the movement of the lubricant molecules in the film intensifies, and a large number of these molecules migrate to both sides of the film.PEThe physical bonding process between molecules destroys the newly formed weak bonding force. The longer the time, the stronger the destructive force and the lower the composite strength.

Leave a Reply

Your email address will not be published. Required fields are marked *