- Fast & global delivery
- Packaging Manufacturer Since 2005
PET · VMPET · ALUMINUM FOIL · NYLON · KRAFT · MONO-PE · PLA
Flexible Packaging Materials and Laminate Structures for Custom Pouches
Every pouch we make is a laminate: a print film, a barrier layer and a food-grade sealant bonded on our own dry laminators. This page lists the structures we run, what each layer does, how thick it is, and the barrier figures measured on the films we buy, so you can choose the material before you ask for a quote.
- 13 standard structures
- Measured OTR and WVTR data
- Layer-by-layer thickness
- Recyclable and compostable options
- Free print sample film before bulk
Reply within one business day · Samples of two structures side by side on request
- Structures
- 13 standard laminates, 2 to 4 layers
- Barrier data
- OTR and WVTR measured on our barrier films
- Print layer
- PET or matte OPP 12–15 µm, or kraft paper
- Sealant
- Food-grade PE, CPP or retort-grade RCPP
- Seal check
- Heat-seal strength ≥ 7 N/15 mm on every batch
- MOQ
- 1,000 digital · 10,000 gravure · 30,000 eco
HOW A POUCH LAMINATE IS BUILT
Three Layers, Three Jobs: Print, Barrier and Seal
A laminate is written from the outside in, so PET / VMPET / PE means a PET print film, a metallized PET barrier and a PE sealant. Change one layer and the look, the barrier or the price changes with it.
Look and protectionPrint layer (outside)Carries your artwork and takes the scuffs
Reverse-printed PET for gloss, matte OPP for a soft matte, or kraft paper for a natural look. The ink sits between this film and the next layer, so it never touches the product or rubs off.
PET 12–15 µm · MOPP 15 µm · kraft 50–60 g/m²Shelf lifeBarrier layer (middle)Keeps out oxygen, moisture and light
This layer decides shelf life. Metallized PET (VMPET) gives a high barrier at a low cost, aluminum foil the highest, nylon adds toughness for vacuum and liquids, and EVOH gives a clear oxygen barrier where it is needed.
VMPET 12–15 µm · AL 8 µm · NY 15 µm · EVOHSeal and food contactSealant layer (inside)Touches the food and makes the seals
Food-grade PE for most dry and frozen foods, CPP where a stiffer or clearer inner film helps, and retort-grade RCPP for pouches sterilized at 121–135 °C. Its thickness is chosen from the fill weight.
PE · CPP · RCPP · sized to your fillSTRUCTURE CHART
13 Pouch Laminate Structures, Side by Side
The barrier columns are a ranking for comparing structures, not test results; the measured figures for the barrier films themselves are in the next section. A laminate is roughly as good as its best barrier layer, provided the seals and folds stay intact.
| Structure (outside → inside) | Layers | Oxygen | Moisture | Light | Best for | MOQ per design |
|---|---|---|---|---|---|---|
| PET / PEClear gloss | 2 | Low–medium | Medium | None | Candy, cookies, dry snacks sold within weeks | 1,000 |
| MOPP / PET / PEClear matte | 3 | Low–medium | Medium | None | Frosted-look candy, granola and bakery bags | 1,000 |
| PET / VMPET / PEMetallized gloss | 3 | High | High | High | Chips, snacks, pet treats, coffee | 1,000 |
| MOPP / VMPET / PEMetallized matte | 3 | High | High | High | Premium coffee, tea, supplements | 1,000 |
| PET / AL / PEFoil | 3 | Highest | Highest | Complete | Whole bean coffee, protein powder, export | 1,000 |
| PET / AL / NY / PEFoil for liquids and vacuum | 4 | Highest | Highest | Complete | Sauces, liquids, heavy or vacuum packs | 1,000 |
| NY / PEVacuum | 2 | Good | Medium | None | Meat, cheese and seafood vacuum bags | 1,000 |
| PET / NY / PETough clear | 3 | Good | Medium | None | Frozen food, spout pouches, shell-on seafood | 1,000 |
| MOPP / kraft / VMPET / PEKraft, metallized lining | 4 | High | High | High | Coffee, tea, bakery with a paper look | 1,000 |
| Kraft / PET / PEKraft, clear lining | 3 | Low–medium | Medium | Partial | Granola, dry goods, simple CMYK print | 1,000 |
| PET / AL / RCPP · PET / NY / AL / RCPPRetort | 3–4 | Highest | Highest | Complete | Ready meals and tuna sterilized at 121–135 °C | 10,000 (gravure only) |
| BOPE / PERecyclable mono-PE | 2 | Medium | Medium | None | Dry food where PE film recycling exists; not for liquids | 30,000 |
| Kraft / PLA · kraft / metallized PLACompostable kraft | 2 | Low–medium | Moderate | Partial | Coffee, tea and snacks sold quickly | 30,000 |
MOQ: digital printing from 1,000 and gravure from 10,000 bags per design for standard structures. Retort pouches are gravure printed only.
MEASURED BARRIER DATA
Oxygen and Moisture Transmission, Measured on Our Films
These figures come from third-party type tests in 2025–2026 on batches of the films we laminate, all of which also passed China’s GB 4806.7 food-contact tests. Lower is better. Oxygen transmission (OTR) shows how much oxygen passes through the film per day; water vapor transmission (WVTR) shows the same for moisture.
| Film | Property | Measured | Standard limit | Note |
|---|---|---|---|---|
| Metallized PET (VMPET), 12 µm | Oxygen transmission | 1.4 cm³/(m²·24 h·0.1 MPa) | ≤ 6 | Pressure-sensor method |
| Metallized PET (VMPET), 12 µm | Water vapor transmission | 0.6 g/(m²·24 h) | ≤ 2.5 | Gravimetric method |
| PET print film | Oxygen permeability, 23 °C, 0% RH | 1.72 × 10−15 cm³·cm/(cm²·s·Pa) | ≤ 2.25 × 10−15 | About 125 cm³/(m²·day·atm) for a 12 µm film (our calculation) |
| PET print film | Water vapor transmission, 38 °C, 90% RH | 5.3 g·0.1 mm/(m²·24 h) | ≤ 6.6 | Normalized to 0.1 mm |
| BOPP film, 18 µm | Water vapor transmission | 1.4 g/(m²·24 h·0.1 mm) | ≤ 2.0 | Normalized to 0.1 mm |
| CPP heat-seal film, 50 µm | Water vapor transmission | 2.3 g/(100 µm·m²·day) | ≤ 5.0 | Desiccant method |
How to read these numbers
- The metallized PET layer cuts oxygen transmission to a small fraction of plain PET, which is why VMPET structures are the standard for coffee, chips and snacks.
- Units differ between tests: some are per film, others normalized to a 0.1 mm or 100 µm thickness, so compare within a row, not across rows.
- Aluminum foil is the highest-barrier layer we use. For a figure on your exact laminate, we arrange a third-party OTR/WVTR test on your structure before bulk.
MATERIALS A–Z
Every Film and Paper We Laminate
Thicknesses are the grades we stock. The sealant is chosen from your fill weight and product, so we propose it with the quote. Convert microns to mil.
| Material | Typical thickness | What it is | Used as |
|---|---|---|---|
| PET (polyester) | 12–15 µm | Glossy print film; stiff, heat-resistant, clear | Outer layer of most laminates |
| MOPP (matte OPP) | 15 µm | Matte on one side, smooth on the other | Outer layer for a soft matte look |
| OPP / BOPP | 18–25 µm | Clear, crisp, good moisture barrier | Header bags and some outer layers |
| VMPET (metallized PET) | 12–15 µm | PET with a vacuum-deposited aluminum coating | High-barrier middle layer |
| VMCPP (metallized CPP) | 20 µm | Metallized sealant film | Lower-cost metallized inner layer for snacks and roll film |
| Aluminum foil (AL) | 8 µm | Solid metal foil; opaque | Highest barrier to oxygen, moisture and light |
| Nylon (NY / PA) | 15 µm | Tough and puncture-resistant | Vacuum bags, liquids, heavy and sharp products |
| EVOH | Thin co-extruded layer | Clear oxygen barrier | Spout pouches for sauces where clarity matters |
| PE (polyethylene) | Sized to fill weight | Soft, seals well, stays flexible when frozen | Inner sealant for most food pouches |
| CPP / RCPP | Sized to fill weight | Stiffer, clearer sealant; RCPP withstands retort | Inner layer for retort and some snack bags |
| Kraft paper | 50–60 g/m² | Natural paper look and feel | Outer or second layer; FSC® paper on request |
| PLA | Film layer | Plant-based compostable film | Compostable kraft / PLA structures |
| BOPE | Film layer | Oriented PE print film | Recyclable mono-PE structures |
CHOOSE BY PRODUCT
Which Structure Suits Your Product
Starting points we quote most often. Shelf life, filling method and where the pouch is sold can change the choice, so we confirm it with samples filled with your product.
| Product | Usual structure | Why | More |
|---|---|---|---|
| Whole bean and ground coffee | PET / AL / PE · MOPP / kraft / VMPET / PE | Oxygen and light barrier; add a one-way valve | Coffee bags → |
| Tea and herbs | MOPP / VMPET / PE · kraft / VMPET / PE | Aroma and moisture barrier | Tea bags → |
| Chips and crisps | PET / VMPET / PE | Oil, light and moisture barrier | Chip bags → |
| Candy and gummies | PET / PE · MOPP / VMPET / PE | Moisture barrier; clear to show color | Candy packaging → |
| Protein powder and supplements | PET / AL / PE · MOPP / VMPET / PE | Moisture and oxygen barrier | Supplement packaging → |
| Pet food and treats | PET / VMPET / PE · PET / NY / PE | Barrier plus puncture strength | Pet food bags → |
| Frozen food | PET / NY / PE · PET / PE | Flexible at −18 °C and below | Frozen food bags → |
| Meat, cheese and seafood | NY / PE · PET / NY / PE | Vacuum and puncture resistance | Seafood packaging → |
| Liquids and sauces | PET / NY / PE · PET / AL / NY / PE | Leak-free seals; spout fitment | Spout pouches → |
| Ready meals | PET / AL / RCPP | Survives sterilization at 121–135 °C | Retort pouches → |
| Automatic packing lines | PET / VMPET / PE · MOPP / VMPET / PE | Printed roll film for VFFS and flow wrap | Roll stock film → |
THE SAME STRUCTURES IN REAL BAGS
What These Materials Look Like
Pouches we have produced in each structure. Open one for its specifications.
LOWER-IMPACT OPTIONS
Recyclable, Compostable and Paper-Based Structures
Lower-impact structures trade some barrier for an end-of-life claim. We tell you plainly where each works and where it does not, so the claim on your bag stays accurate.
- Recyclable mono-PE
- BOPE / PE in a matte, gloss or kraft-look print. Recyclable where PE film collection exists; not for liquids or spout pouches. MOQ 30,000 per design.
- Compostable kraft / PLA
- Kraft paper with a plant-based PLA film inside, clear or metallized. Best for products sold quickly. MOQ 30,000 per design.
- FSC® kraft paper
- FSC®-certified kraft paper is available on request; printing the FSC label on the bag needs chain-of-custody documents, so tell us at the quote stage.
- Water-based inks
- Our gravure presses print with water-based inks. Digital orders use HP Indigo ElectroInk. How we print.
HOW WE MAKE AND TEST LAMINATES
From Film Roll to Tested Pouch, in One Plant
Printing, lamination and bag making run in our 6,520 m² cleanroom plant. A laminate that separates or a seal that leaks undoes any barrier on paper, so both are tested before packing. Peel test · Tensile test · Tear test.
- Incoming filmEvery film, ink and adhesive batch arrives with food-contact and RoHS/REACH reports and is checked for thickness and surface tension
- PrintReverse printing on the outer film: gravure with water-based inks, or HP Indigo digital for short runs
- Laminate2 dry laminators bond print film, barrier and sealant; the rolls then cure before slitting
- TestPeel strength (≥ 0.6 N/15 mm), tensile and tear tests on our universal testing machine
- Convert and checkBags are made, then heat-seal strength (≥ 7 N/15 mm) and leak tests before release
DOCUMENTS
Test Reports for Our Laminates
Open any document for the details; copies for your structure come with the quote.
Roll film GB 4806.7 testFood-contact test on our printed MATOPP / VMPET / PE laminate.View details →
Metallized CPP roll film testFood-contact test on matte OPP / PET / metallized CPP film.View details →
Retort pouch EU migration testSGS migration test on our PET / NY / AL / RCPP retort pouch.View details →
FDA 21 CFR 177.1520 testedThird-party test report on our PE sealant film.View details →MINIMUMS, SAMPLES AND TESTS
What to Expect When You Choose a Material
- Minimum order
- 1,000 bags per design (digital), 10,000 (gravure). Retort pouches: 10,000, gravure only. Recyclable and compostable structures: 30,000. Roll film: 100 kg per design.
- Material samples
- Free samples of two candidate structures, so you can fill and test them side by side. The sample is free; you cover the courier.
- Print sample film
- After you order, we print your design on your chosen material for free and send photos or the film itself, before bulk production.
- Barrier test on your structure
- On request we arrange a third-party OTR/WVTR test on your laminate before bulk production.
- Lead time
- Digital 7–15 days, gravure 15–30 days after artwork approval.
To recommend a structure, send us
- Your product and how it is filled
- Shelf life you need and storage (room, chilled, frozen)
- Look: clear, metallized, foil, matte or kraft
- Any end-of-life claim: recyclable or compostable
- Process: vacuum, retort, hot fill or roll film
- Bag style, size and quantity per design
Not sure about shelf life? Tell us the product and where it is sold; we propose two options with prices.
FAQ
Packaging Material Questions Buyers Ask
Short, straight answers. Anything else, ask us directly.
What materials are flexible packaging pouches made of?
Most food pouches are laminates of two to four films: an outer print film (PET, matte OPP or kraft paper), a barrier layer (metallized PET, aluminum foil, nylon or EVOH) and a food-grade sealant inside (PE, CPP or retort-grade RCPP).
What does PET / AL / PE mean?
It is the layer order from outside to inside: a PET print film, an aluminum foil barrier and a PE sealant. It is one of the highest-barrier pouch structures, used for whole bean coffee, protein powder and export products.
What is the best material for coffee bags?
For whole beans, PET / AL / PE or a kraft structure with a metallized or foil lining, plus a one-way degassing valve. Metallized PET (VMPET) structures cost less and suit coffee sold within a few months.
VMPET or aluminum foil: which should I choose?
Aluminum foil gives the highest barrier and blocks all light. VMPET is lighter, more flexible and cheaper, and our tested 12 µm VMPET film measured 1.4 cm³/(m²·24 h·0.1 MPa) for oxygen and 0.6 g/(m²·24 h) for moisture. Choose foil for long shelf life or export, VMPET for most retail snacks and coffee.
What are OTR and WVTR?
OTR (oxygen transmission rate) and WVTR (water vapor transmission rate) measure how much oxygen or moisture passes through a film in 24 hours under set conditions. Lower values mean a better barrier and usually a longer shelf life.
Which pouch structure has the highest barrier?
Structures with an aluminum foil layer, such as PET / AL / PE, PET / AL / NY / PE and retort PET / AL / RCPP. Metallized structures come next, then nylon and clear structures.
How thick should a pouch be?
Outer and barrier films are usually 8–15 µm each; the sealant is chosen from the fill weight, so heavier and sharper products get a thicker inner layer. We propose the full structure with the quote.
Are your materials food-safe?
Our barrier and print films pass China’s GB 4806.7 food-contact tests, our PE sealant film is tested to US FDA 21 CFR 177.1520, and our retort pouch passed an SGS EU migration test. We work under ISO 22000:2018.
What is a mono-material recyclable pouch?
A pouch made of one plastic family, such as BOPE / PE, so it can go into PE film recycling where that exists. It has a lower barrier than foil structures and is not suitable for liquids or spout pouches. MOQ is 30,000 per design.
Do you make compostable pouches?
Yes, kraft / PLA and kraft / metallized PLA structures, from 30,000 per design. They suit products sold quickly; ask us which documents are available for the claim you want to print.
Can I get barrier test results for my own structure?
Yes. On request we arrange a third-party OTR/WVTR test on your laminate before bulk production, and send the existing film and food-contact reports with the quote.
What is the minimum order?
1,000 bags per design with digital printing and 10,000 with gravure. Retort pouches start at 10,000 and are gravure printed only; recyclable and compostable structures start at 30,000.
PACKAGING MATERIALS GUIDE
Flexible Packaging Materials: Specifications and Choices
In short
- Flexible packaging pouches are laminates of 2–4 layers: an outer print film, a barrier layer and a food-grade sealant.
- Clear PET / PE suits short shelf life; metallized PET / VMPET / PE suits most snacks and coffee; PET / AL / PE gives the highest barrier.
- Nylon (NY) adds puncture resistance for vacuum, frozen and liquid packs; RCPP is the sealant for retort pouches.
- Measured on YLTPACK’s supplier film, 12 µm VMPET had an OTR of 1.4 cm³/(m²·24 h·0.1 MPa) and a WVTR of 0.6 g/(m²·24 h).
- YLTPACK laminates in China from 1,000 pouches per design (digital) or 10,000 (gravure with water-based inks); recyclable and compostable structures from 30,000.
Flexible packaging material specifications
| Topic | Flexible packaging materials and laminate structures for printed food pouches and roll film |
|---|---|
| Clear structures | PET / PE; MOPP / PET / PE; NY / PE; PET / NY / PE |
| Metallized structures | PET / VMPET / PE; MOPP / VMPET / PE; MOPP / kraft / VMPET / PE |
| Foil structures | PET / AL / PE; PET / AL / NY / PE; retort PET / AL / RCPP and PET / NY / AL / RCPP |
| Lower-impact structures | Recyclable BOPE / PE (mono-PE); compostable kraft / PLA; FSC® kraft paper on request |
| Layer thickness | PET 12–15 µm; MOPP 15 µm; VMPET 12–15 µm; AL 8 µm; NY 15 µm; kraft 50–60 g/m²; sealant sized to fill |
| Measured barrier (films) | VMPET 12 µm: OTR 1.4 cm³/(m²·24 h·0.1 MPa), WVTR 0.6 g/(m²·24 h); BOPP 18 µm: WVTR 1.4 g/(m²·24 h·0.1 mm); CPP 50 µm: WVTR 2.3 g/(100 µm·m²·day) |
| Quality checks | Peel strength ≥ 0.6 N/15 mm; heat-seal strength ≥ 7 N/15 mm; leak, tensile and tear tests |
| Food-contact documents | GB 4806.7 tests on films and laminates; FDA 21 CFR 177.1520 test on PE film; SGS EU migration test on retort pouch; ISO 22000:2018 |
| Printing | Gravure with water-based inks from 10,000 bags; HP Indigo digital from 1,000 bags |
| Minimum order | 1,000 (digital), 10,000 (gravure and retort), 30,000 (recyclable, compostable); roll film 100 kg |
How to choose a pouch laminate
Start with what spoils your product. If it is oxygen or light, as with coffee, nuts and oily snacks, choose a metallized or foil barrier. If it is moisture, as with powders, candy and crisps, a metallized structure is usually enough. If the product is heavy, sharp, frozen or liquid, add nylon. Then choose the look, gloss PET, matte OPP or kraft, and the end-of-life claim if you need one. Finally, confirm the choice with filled samples and, for long shelf life, a barrier test on your exact laminate.
Packaging materials glossary
- Laminate
- Two or more films or papers bonded into one material, combining print, barrier and sealing properties.
- OTR
- Oxygen transmission rate: oxygen passing through a film per area per day; lower is a better barrier.
- WVTR
- Water vapor transmission rate: moisture passing through a film per area per day; lower is a better barrier.
- VMPET
- Vacuum-metallized PET film; a thin aluminum coating gives a high barrier at low weight and cost.
- Sealant
- The inner layer that touches the product and melts to form the seals.
- Dry lamination
- Bonding films with adhesive that is dried before the layers meet; the method we use.
- Mono-material
- A pouch made from one plastic family so it can enter that material’s recycling stream.
- RCPP
- Retort-grade cast polypropylene sealant that withstands sterilization at 121–135 °C.
About YLTPACK, the flexible packaging manufacturer
- Company
- Shenzhen Yongliantai New Material Technology Co., Ltd. (brand name: YLTPACK)
- Founded
- 2005; 20+ years making flexible packaging
- Factory
- 6,520 m² cleanroom plant, Building 7, No. 9 Baoqing Road, Baolong Street, Longgang District, Shenzhen, China 518115
- Equipment
- 30+ machines: 4 printing presses, 2 dry laminators, 11 bag-making machines, 3 slitters
- Certifications
- ISO 9001:2015 (no. 8000546), ISO 22000:2018 (no. 513FSMS2500048), GRS 4.0
- License
- China production license for food-contact plastic packaging, (粤) XK16-204-11542
- Contact
- Feynman@yltpacking.com · +86 182 1944 5665 (WhatsApp)
Standards and documents referenced: China GB 4806.7-2023 (food-contact plastics); US FDA 21 CFR 177.1520 (olefin polymers); Regulation (EU) No 10/2011; ISO 22000:2018; ISO 9001:2015. Barrier figures are from third-party type tests on supplier film batches, 2025–2026. View all certificates and test reports →
Written by the YLTPACK sales team · Reviewed by YLTPACK QC team · Last updated: November 2026
RELATED
Packaging Built From These Materials
Same plant, same films, different formats.
GET A QUOTE
Tell Us About Your Product
The product, the shelf life you need and roughly how many bags is enough to start. We reply within one business day with two recommended structures and itemized prices.
What happens next
- Within one business dayTwo recommended structures and itemized prices.
- Free design supportOur in-house team prepares or checks the artwork for your chosen material.
- Free print sample filmAfter you order, we print your design on your material to check before bulk.
- ProductionDigital 7–15 days, gravure 15–30 days after artwork approval.
Written by the YLTPACK sales team · Reviewed by YLTPACK QC team · Last reviewed: November 2026